M.2 SSD not detected during Linux installation

Asked 1 months ago, Updated 1 months ago, 2 views

I tried to install Linux, but it seems that I am using an SSD in m.2 and Linux does not recognize the SSD.Is there any solution?
The model is XPS 13 Platinum.

linux

2022-09-30 11:17

1 Answers

@sayuri's comment seems to have solved this question.Regarding the content on the external site, I will quote it as an answer.(Some images may not be displayed, but it was displayed successfully by changing to the English version -- as of May 1, 2019)

Hard drive not detected

When booting Ubuntu 14.04/15.04 media on a system with only PCIe-based m2 drives, the installer may not be able to detect the hard drive (typically, the installer only searches /dev/sdx by default).

NVME Load

NOTE: The user must access the system BIOS (F2 at boot) and change the SATA setting to AHCI.The drive is still not detected after this change.Users should follow these steps:

  • Add the following kernel arguments at startup:
    nvme_load=YES

  • When the
  • keyboard prompt appears, press F12.

  • Press
  • Enter to select the language; press
  • Press
  • Esc.
  • Change the boot option to add "nvme_load=yes" and remove "quiet splash---".
  • Press
  • Enter
  • Displays the NVME drives available in the installer.
    controller:Nvme0
    ports:N1
    partitions:Px

At startup, add the following kernel arguments:
nvme_load=YES

Press F12 when prompted.

Loading Ubuntu to a System Using PCIe M2 Drives|Dell Japan


2022-09-30 11:17

If you have any answers or tips


© 2022 OneMinuteCode. All rights reserved.