Information on how to make sounds from the Presense

Asked 3 months ago, Updated 3 months ago, 9 views

For more information on connecting speakers to the Presense and making sounds

I'd like to connect the speakers to JP8 and JP9 on the Spresense expansion board and play the sound.

We are considering implementing it in an arduino-SDK environment, but from JP8 and JP9 on the expansion board
How do I play sound from the speakers?

spresense

2022-09-30 11:51

2 Answers

It's not an official method, but you can use R15, R16, R17, R18 to shorten it easily. Some of you have already done it, so you might want to refer to it.

Playing High Resolution V1.1.2
Starting with L-Chika in Spresense https://www.denshi.club/cookbook/arduino/spresence/spresence-7-v112.html


2022-09-30 11:51

Here's how to use the speakers.
https://developer.sony.com/develop/spresense/docs/hw_docs_ja.html#_HOW_TO_USE_SPEAKERS
It seems that the main board needs to be renovated.

(Here's an excerpt from the manual)

The main board is set to match the headphone output of the expansion board at the time of shipment.To use the speakers, you need to replace the chip parts on the main board and solder them to the expansion board. This will involve soldering of small parts and remodeling of substrates, so please be careful only if you have the right skills and equipment.
The solder operations described herein are not covered by the Product Warranty under any circumstances.Do it at your own risk.


2022-09-30 11:51

If you have any answers or tips


© 2023 OneMinuteCode. All rights reserved.